Raspberry Pi Rack w/more fan

** Edit 7/15 - Added a version of the “power tray” modified to work with an anger 6 port hub, and the ability to attach to a face-plate as opposed to free floating.

=======

The original case was utterly fantastic, however it had a few issues in my opinion, namely 30mm fans are annoying loud, with bad bearings.  I modified the original back doors to support 80mm fans (noctua 5v fans fit inside, others ymmv) for more airflow.  In my testing this results in a 10-15 degree drop over using the original 30mm fans.

Also, given the new massive exhaust, and shifting the tray fronts to the vented ones the top did not need the air intake, so the original top was redesigned to remove it, and in doing so remove the buttons and the need for a 3 layer top.

Use the original parts in the original model, just replace the back doors with this one for an instant cooling boost!