These wire spool holders accept 1/2" dowel and will mount to pegboard with 1" hole spacing and 1/4" hole size. Supports up to 3" diameter spools.
Use the following table to determine lengths to cut the wooden dowel to:
Pegboard Spacing | Dowel Length [inch] |
---|---|
2 | 1.825" |
3 | 2.825" |
4 | 3.825" |
5 | 4.825" |
...and so on.
Supports required for the pegs and half of the dowel holder, if printed on its side.
The author marked this model as their own original creation. Imported from Thingiverse.