Honeycomb Storage Wall (HSW) Shelf

This is a shelf and shelf support and for the Honeycomb Storage Wall (HSW). The shelf is a the standard wall-honeycomb-part.stl with side walls added. Please note that some of the honeycombs that may look complete on the shelf supports may not actually function completely as they may be partially blocked by the side walls. 

To attach the shelf supports to the wall you will need four insert-empty.stl (or a variation of it) to attach the shelf to the support you will likely be able to do 3 shelf sections to two supports using the insert-hollow-tre.stl to attach the shelves. 

I felt the use of hole inserts and helped reduce the amount of support material needed if the shelf supports are printed on the sides. 

Please note the “Large Insert” version was made by request and I have not tested it. 

Edited into a shelf bracket.