Hueforge - Goku v1

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Black Transmission Distance: 0.3
PLA PolyLite Pro Red Transmission Distance: 1.5
PLA+ Sunlu Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Black until layer #12 at 1.04mm
Red until layer #26 at 2.16mm
Pure Yellow until layer #33 at 2.72mm
White for the rest.