I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a finger hole to spin with more leverage.
I Put washers and two nuts locked together (at the outer part of the tool) for smoother turning. It is wide enough to use it with the bigger 10mm and 45 ACP Glock slides but will still work on standard-size slides.
Parts not printed:
1 - 1/4" x 4-1/2" bolt
4 - 1/4" nuts
4 - 1/4" washers
The user re-uploaded this model. The user is not the original author of the model.