yes, i used SEM products, here the are following steps and products i used, 1.sand till smooth to touch with 200 and 320 girt 2.lightly spray adhesion promoted (i used something called bull dog) 3.spray a nice thick coat of SEM-High Build primer, carefully not to fill the letter holes. 4.sand till smooth with 320 girts and 400 grit 5.Spray SEM textures coat, (Check on youtube how to control texture) 5.lightly sand with 400 to smooth the texture (CHeck youtube to get a idea) 6.spray light coat of SEM trim Black 7.spray sem trim blacks in thin passes with 5 mins gap between them till you get desired coverage. (edited)
The photos you show is not the printed part so far as I could see. Please show the printed part. What material did you use ?
lol, that is the printed part, + lots elbow geese +good quality paint + hand lettering
That is really really very nice.
Maybe could you tell us more about the post processing, always ready to learn.
yes, i used SEM products, here the are following steps and products i used,
1.sand till smooth to touch with 200 and 320 girt
2.lightly spray adhesion promoted (i used something called bull dog)
3.spray a nice thick coat of SEM-High Build primer, carefully not to fill the letter holes.
4.sand till smooth with 320 girts and 400 grit
5.Spray SEM textures coat, (Check on youtube how to control texture)
5.lightly sand with 400 to smooth the texture (CHeck youtube to get a idea)
6.spray light coat of SEM trim Black
7.spray sem trim blacks in thin passes with 5 mins gap between them till you get desired coverage. (edited)
Thanks for the info. I need an other lens hood for a Bronica GS-1 6x7, so a good example.
@Fransiscus_31689, i can share the stp file if you want so that you can adapt the mount to your lens,
@aditya_112990 Hello there, I wonder if you can be very kind to share me the stp file that I can adapt it to my 60mm 3.5 CF lens, thanks a lot