Doorstop

This doorstop / door wedge has a fixed place to store it when you don't need it. You don't need to search for it when you need it, and it's not just lying around on the floor.

The door wedge works best with rebated doors (in German: gefälzt).

Note: The attached STL file will likely not fit your doors. Comment if you need other sizes, or generate them yourself using the attached parametric FreeCAD model.

Print on the side for best stability. Here some recommended print settings:

• Layer Height: 0.2mm
• Supports: No
• Brim: Yes
• Infill: Doesn't matter