Collapsing Scottish Claymore with Replaceable Blade
Description
This version of the sword has a screw on cap so the blades can be printed separately and inserted or replaced.
This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. The tallest part is 300mm as printed but it extends to 1530mm long!
Supports are not required, for best results use a .4mm nozzle. You can print the blades all at once concentrically or one at a time in vase mode. I suggest printing in vase mode but if printing concentrically, the test print can be found here. Find detailed instructions on how to print collapsing swords on my website.
Printed on the Muldex rep-rap IDEX printer
Model origin
The author marked this model as their own original creation.
