This is a printable version of a common fuel syphon tube used to transfer fuel from/into a cannister..
I don't know if anyone made one yet, a quick search on thingiverse didn't show any.
I'm using a tube with 12mm inner diameter and a 15.85mm marble. I can easily adapt it for other tube or marble sizes.
The version I printed is split in top and bottom and it's united with 3 M3 screws/nuts.
I included a "whole" version, if anyone wants to try waiting by the printer and placing the marble inside mid-print.
Update 20-11-2019: I have now printed the whole thing in one go, first it came loose frm the bed, I didn't want supports ruining the finish, so I added a base to increase adhesion, it's easy to break apart and leaves a tiny burr, easy to sand off. You can either remain by the printer and pause it to insert the marble or use the pause at specific layer function.
This is a printable version of a common fuel syphon tube used to transfer fuel from/into a cannister..
I don't know if anyone made one yet, a quick search on thingiverse didn't show any.
I'm using a tube with 12mm inner diameter and a 15.85mm marble. I can easily adapt it for other tube or marble sizes.
The version I printed is split in top and bottom and it's united with 3 M3 screws/nuts.
I included a "whole" version, if anyone wants to try waiting by the printer and placing the marble inside mid-print.
Update 20-11-2019: I have now printed the whole thing in one go, first it came loose frm the bed, I didn't want supports ruining the finish, so I added a base to increase adhesion, it's easy to break apart and leaves a tiny burr, easy to sand off. You can either remain by the printer and pause it to insert the marble or use the pause at specific layer function.
The author marked this model as their own original creation. Imported from Thingiverse.