Unifi Switch 8 Port / US-8-60W 19" Rackmount

A 19" rackmount for the US-8 switch from Ubiquiti. Both parts are screwed together with a screw and nut. Glue is not needed.

Is best printed in PETG or a more stable material. I have used 5 perimeters.

There is a cutout for the LEDs that are on top of the switch. I mount a blind above the switch that I can easily remove to make the LEDs visible at all times. But it is not absolutely necessary.

The overhangs are very difficult to print and therefore do not look so nice. However, they are not visible when the switch is mounted. A lot of plastic is saved for this.