QuinLED Dig Octa System PSU Mount

Simple to print, print face down.

This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350 or Meanwell LRS 600 (pick the STL for the correct PSU)

The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.

Mounting Hardware:

4x - M4 - 8mm bolts (secure mount to PSU)

8x - M2 - 12mm bolts/nuts (secure controller to mount)

Dig Octa System - https://quinled.info/quinled-dig-octa/

MW LRS 350 - https://www.amazon.com/NVVV-switching-LRS-350-12-ultra-thin-transformer/dp/B08GM17QZ8?th=1

MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232

Category: Electronics