Hex-spenser

More refinements of the cutter are pending

For this model you will need to print:

1x right side
1x left side
3x standoffs
1x tape holder
1x cutter (cutter v2 has smaller teeth)

The bottom 3 standoffs should be glued in (Or press-fit)

All parts have .2 mm tolerances.

I printed the cutter at .1 layer hight. It isnt the best but it does work if you are careful. I'd also recommend gluing it in.

I may upload the Onshape files soon.

Made in Onshape and rendered in Fusion 360

This is also my first uploaded model!