glove80 mounting plate (Read description)

Mounting plate for the glove80. This is meant as an alternative to acrylic mounting plates. 

This mounting plate is tested and confirmed working. However, please note that it is 3mm thick, which may be thicker than the acrylic mounting plates. This means that some of the shorter stock legs may be too short to screw all the way through due to the additional thickness. You may need to trial and error with the provided spacers/legs. Please let me know if you remix this. The additional thickness can be addressed by adding some recesses to the mounting plate for the cylindrical feet.

Recommend ≥5 top/bottom shell layers for rigidity. I printed one with 5 top/bottom shell layers, and one with 6 top/bottom shell layers. Both work fine. There is a little flex if you try to bend it with both hands. However, once the plate is screwed into the case, warping has not been an issue.