Moccamaster Cup-One Cup Tray

This is a cup tray for the Technivorm Moccamaster Cup-One 1-cup coffee maker.  The silly little cup/drip tray that comes with the coffee maker has a circular recess that is clearly designed for the cup included with the machine, and doesn't work well with normal coffee mugs.

This tray is a little larger than the original, it's flat, and will accommodate even a big fat coffee-shop mug.  The overall thickness is pretty much the same as the stock tray.

No, this is not a “drip tray” - because I never used the tray to catch drips (if I want to grab the mug early, I swap in an espresso cup to catch the drips - easier to clean).  I just wanted something big and flat.  If you need the drip tray functionality, there is at least one other Cup-One tray on Printables that is designed that way.

Printing:  

I used PETG.  PLA might work (I haven't tried it), but the mug can get kinda warm, so if it gets soft and distorts, you've been warned.  Print with the top surface on the print bed, no supports.  You can probably use just about any perimeter and infill settings (it's only supporting a cup of coffee, after all).