Bed leveling knob for small I3 style printers

I made this to fit my small acrylic framed Geeetech I3 Pro C printer. Unfortunately, small knobs are required for these style printers. Subsequently, this knob works quite well on my Anet A8.

These require a M3 nut. Press the nut into the hex opening, then draw it in until seated using a M3 screw to pull it from the backside.

Print Settings

Printer:

Geeetech I3 Pro C

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20%

Filament:

Green