Big Rig Truck 10-Wheeler Print in Place PLUS (See Video)
No Supports. Print in Place + 4 Stops! Each stop add Pre-Printed Wheels, wheels printed INTO model. Cab-over version.
105
227
3
1250
updated July 2, 2023
Description
PDFWhat is Print in Place PLUS? It's adding filament change stops to insert parts.
- Filament changes are set to 13.4, 29.6, 53.0, & 69.4 (for .30mm layers 69.5)
- Do not change color, instead just add tires and restart with same color.
- Tires will be printed into the truck permanently.
CAUTION - Be sure tires clear Pinda Sensor and Nozzle before continuing!!
it will be close but should not interfere. Follow directions step-by-step:
Step 1: Print 10 Tires. You will need these when printing the main truck.
Step 2: At each stop add 2-3 Tires. Direction doesn't matter, they are symmetrical. Make sure they sit all the way down and clear the nozzle before continuing. Gentle- Dont snap them off print bed.
Repeat for every stop! So easy! 3-2-2-3
Here you can see the 4 stops in PrusaSlicer:
Tags
Model origin
The author remixed this model.
