Calibration Cube

I created this cube with the intention of providing more comprehensive information about your printer's calibration, beyond simple instructions. Here's an overview of the various tests it includes:

1. Labeled Dimensions: These markings allow you to assess how your printer/slicer may be distorting the length of the cube's sides.

2. Bottom Text: A section of text placed at the bottom helps you determine if your nozzle is positioned too high or too low during printing.

3. Text Depth: The labeling text is precisely 1mm deep, allowing you to observe how your printer handles small bridging and whether it creates text that is too deep or too shallow.

4. Hollowed Core: The cube features a hollowed out core that reveals any potential issues with stringing, drooping, or overhangs that your printer may experience.

5. 14mm Hole: This hole provides a gauge for evaluating how accurately your printer produces holes, whether they tend to be oversized or undersized.

6. Stair Stepping Test: This test is designed to showcase how apparent stair stepping will appear on future prints based on your current settings.

I hope this cube proves useful in helping individuals fine-tune their printers more efficiently than other available tests. Enjoy!