Cats Sculpt

My take trying to create a more realistic 3D using Hueforge. The size is 200x200.

Hope you like it :)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Overture Black Matte
• PLA Overture Dark Brown
• PLA Overture Light Brown
• PLA Bambu Lab White Basic

Swap Instructions:

• Black until layer #5 at 0.48mm
• Brown until layer #10 at 0.88mm
• Coffee until layer #19 at 1.6mm
• White for the rest.

Enjoy my work? Support me by joining my club. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.