Stand Dryer
Stand for toys that need drying. The cavity is designed to be filled with desiccant with the toy sliding on the outside.
11
44
0
1027
updated June 22, 2023
Description
PDFDesigned to keep the toy upright and aid in the drying process.
The internal cavity is to be filled with desiccant to suck out the moisture.
There is a hole on the bottom with a set screw to seal after desiccant is added.
Make from ABS/PETG so the whole unit can be dehydrated without removing the desiccant.
Tags
Model origin
The author marked this model as their own original creation.
