This is a removable lens cap for the Olympus TG-6 Camera. It is printed to replace the default bezel that you receive with the camera. 2 files need to be printed for the full assembly. The two halves are then connected together using a piece of 1.75mm filament.
The lens cover is designed with a little tab that will lock closed and keep it from falling open.
The cover opens down and to the right so that once the joint becomes a bit more loose it will naturally close if you drop your hand down and go to put the camera in your pocket.
I recommend using supports for printing the base and the cover can be printed on its back with no supports
The author marked this model as their own original creation.