Anycubic Kobra Neo Dual 5015 Fans

A fan duct and mount for dual 5015 fans for the Anycubic Kobra Neo. I wanted something for the Anycubic Kobra Neo that provided the dual 5015 fan solution like the Hero Me Gen 7 style of part cooling. This is my remix to support dual 5015 fans. With dual fans, each fan can be run slower for normal use while maintaining the same amount of airflow, leading to noise reduction. Supports 2, or 1, 5015 blower fan. I used 24v ones from WINSINN: https://www.amazon.com/WINSINN-Cooling-50x50x15mm-Extruder-Makerbot/dp/B079BPS9Q8/ref=d_m_crc_dp_lf_d_t2_vft_none_sccl_3_1/138-7790670-2202422?pd_rd_w=r7EGK&content-id=amzn1.sym.de57aa3b-fa0b-416e-9843-604da2a420b7&pf_rd_p=de57aa3b-fa0b-416e-9843-604da2a420b7&pf_rd_r=RNENQ8GQGAVQX71JVVE4&pd_rd_wg=KPvVt&pd_rd_r=7701dfd9-69f4-4b99-bd70-e8253e441c68&pd_rd_i=B079BPS9Q8&th=1

No supports needed

Printed on Stock Anycubic Kobra Neo

30-50% Infill 

3 perimeters

3 top & 3 bottom layers

Mounts to the existing fan mount on the Kobra Neo (3 bolts)

Should clear everything - if it doesn't, use a little heat at the back of the duct to just mold it into place.

There is a hole to put a ziptie - use it to strain relive the cables from the fan, thermistor, heater cartridge, etc.

Dual 5015 fans can be run at <50% power for normal use, 60-70% for demanding applications.

Hero Me part cooling link: https://www.printables.com/model/39322-hero-me-gen-7-platform-release-32

*I wired the dual 5015 fans using an external power supply. The fan control on my Kobra Neo doesn't seem to work correctly.