Aerogarden Harvest Water Cap Pod Converter

This lid replaces the watering cap on the Aerogarden Harvest basic so you can add another pod or two for plants. The…
19
65
1
478
updated June 20, 2023

Description

PDF

This lid replaces the watering cap on the Aerogarden Harvest basic so you can add another pod or two for plants. The 2nd hole can be capped to still allow for easy watering.

Since the lid is so narrow to fit, it's worth noting the pod doesn't completely sit flat in the hole. It also won't get the benefit of having water pumped directly to it, so when it's germinating just spray it and make sure the water level is high enough to absorb into the sponge and it should be fine.

I don't know measurements for other AG units but the piece measures 94x36 mm.

Printed in White PLA, 0.28 resolution, 2 walls (standard Cura settings) on Creality Ender 3 v2 Neo. If your unit is sensitive to algae you may want a dark color instead.

Traced with Procreate and Inkscape and modeled in Tinkercad.

Category: Outdoor & Garden

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License