Colorful Upgrade For Ultimate Prusa

An Upgrade for the Ultimate Prusa Casing

For those who want a little more color on the UltimatePrusa casing.
These sleeves are simply pushed into the honeycomb pattern.
I know it is like a puzzle because there are many different lengths but once this is solved it will look very nice.

Important:
Due to the small tolerances, some sleeves will fit more loosely than others. In this case, simply stick a piece of tape on it and push it in. If it is tight, there will be no noise.
For whatever reason, prusaslicer sometimes not all walls completely sliced depending on the profile. If this is the case, set the external perimeters to 0.44mm.

Edit: I've added a separate stl file from the top row in case you just want this one.

There is also a model that turns the top row into a storage space for your nozzles!

For those who want to print a little less there is also a version with shorter pieces. However, these usually have to be fixed and it is more difficult to align them evenly.

If you like check out my other designs too!