Magnet adaptor for goBilda uchannel.

This adaptor can be used on the goBilda extruded aluminum uchannel platform.
11m
1× print file
0.20 mm
0.40 mm
2.00 g
0
3
0
264
updated June 22, 2023

Description

PDF

This magnet adaptor holds tools and hardware in place while constructing projects. The adaptor can also be used to organize your smaller steel based hand tools. I designed the printed hardware base to align with goBuilda's extruded aluminum U channel, which is based on an 8mm spaced grid for building prototype robotics chassis. (Link Below.)

I procure the neodymium magnets from K and J magnetics and extruded aluminum U-channel from goBuilda, because these companies produce high quality gear, and both are US based small businesses. 

goBuilda's website:

Uchannel:

https://www.gobilda.com/1120-series-u-channel-7-hole-192mm-length/ 

Magnet dimensions:

.5" dia x .125" thick

Sourced from K and J magnetics:

https://www.kjmagnetics.com/proddetail.asp?prod=D82-N52 

Printer's notes:

The g-code file is ready to print. It will print the base and magnetic cup, and then stop and prompt you to add the (.5" diameter ) magnet. Once the magnet is added you can hit the button to resume the print. 

During the pause print time, the extrusion head is still heated and filament will continue to flow out. I would recommend clearing the loose filament before hitting the resume button to keep the finish of the print as clean as possible. In the photos I used metallic grey and metallic purple Prusament filaments for my prints; but feel free to use fun colors. 

 

Print and enjoy! :)

 

 

 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more