Updated Latch for Voron Stealthburner Clockwork 2 (fat_finger)

After breaking several latches, I remixed the original to make it thicker without causing any fitment issues.
50
589
2
1872
updated June 19, 2023

Description

PDF

No explanation needed if you use the SB CW2. The original stealthburner lever design is thin and there's plenty of room for adding material. We call this the fat_finger mod. If you cannot print one because you only have one printer and the latch broke, contact support@tinymachines3d.com!

Print Settings

  • Material: ABS
  • Layer height: 0.2mm.
  • Extrusion width: 0.4mm, forced.
  • Infill pecentage: 40%
  • Infill type: grid, gyroid, honeycomb, triangle, or cubic.
  • Wall count: 4.
  • Solid top/bottom layers: 5.
  • Supports: NONE.

Tags



Model origin

The author remixed this model.

License