Fallout "BOOM" Box

Greetings fellow Vault Dwellers! For just a few scavenged parts and perhaps a few caps, you can create a one of a kind wasteland masterpiece capable of playing your favorite post-apocalypse music! So grab the Rad-X and a Nuka Cola and lets get going! Perks needed for this legendary piece of ammo consists of: Scrapper, Science, Nuclear Physicist, and Nerd Rage!

Now for the scrap list: 

Set of printed parts

2x 2" speakers

1x 3.7v 5w bt amp board or whatever you desire 

2x 18650 Batteries and charging board - Optional for portability.  I printed a ‘wafer’ to mount the batteries and charging board.

screws of your choice 

heatsets

adhesive

wire/solder

button switch

Instructions - see pics for reference: 

1. Connect wire to speakers
2. Place bottom speaker on the body and mark holes.  Drill to whatever size you want.  I used M4x8's for this project. Insert heatsets if wanted and secure speakers. Repeat for yellow cap as shown. 
3. Secure the bottom of the bomb as shown with hot glue or super glue.
4. Attach switch to top and run wires down the grille, yellow cap, and then body.  You may need to drill an extra hole in the cap for the wires to go through.  Glue the grille and top to the cap. 
5. Connect all wiring and test!!!
6. Glue the yellow cap to the body. I would recommend only hitting a couple of areas with glue in case it needs to be removed one day.
7. Enjoy!!! 

If you make it, post it!!!