steel sheet compartment MINI

This object can be mounted below your MINI to store away the spring steel sheet when not in use. As space is very limited, it is only 1 mm thick, so it is a bit fragile until you mount it. It is mounted with four nonut 1 mm clamps you can get here. After mounting you need to break off the head of the clamp so the sheet can be stored. Whether there is enoung space for the sheet to fit depends on how far apart you fitted the foam pads.

Print instructions

I print in PETG with 0.2 mm layer height and 15% infill. Feel free to share your own instructions. Happy printing! :)