Line 6 Helix or Narrow Pedalboard Tall Angled Floor Riser

Inspired by MendicinoB's 'Line 6 - Helix Stand' on Thingiverse. I needed to get my Line 6 Helix off the ground to prevent my robot vacuum from bumping into it and trying to eat the cords. So it needed to be robust enough to take discount Rosie Uniqua Jetson smacking it around.

The upper holes are for various size dowels (inch & mm) and the big slot is for a 2x4. The lower three holes are to reduce filament usage. Type A & B have a wider leg compared to the Single. Mix & match the three leg types for your needs and connect them with a long dowel or a 2x4 for stability.

This also works with <9.5" deep pedalboards and can work with deeper pedalboards with some creativity but YMMV. I used PLA @ 0.20mm w/10% infill but I don't dance much on my pedalboard.

Category: Music