Bambu Lab X1-C P1P Vented Lid Riser - easy-use plugs

I looked at several Bambu vents to hold the glass up if you needed vented printing (and I can't leave my door open because of where it is), with removeable/sliding vents/plugs so I didn't have to keep taking the whole thing down.

Didn't like the sliding ones, this one was perfect except the prongs on the covers were very long and hard to get in and out.  Also, nothing to grip to get a hold of them.

This remix therefore:

• Has much shorter prongs (still enough to hold on with)
• Has 9+11 instead of 9+2 prong models
• Has cutouts to get your nail under to lever them out.

Tried in ABS and TPU, decided the TPU ones worked better for me.

Additionally to the original model, I used pieces of this https://www.amazon.co.uk/gp/product/B0963W1287/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 instead of the TPU gaskets as it's thinner and stickier.