Blink Mini Pan-Tilt Billy Bookcase Mount

I wanted to mount a Blink Mini Pan-Tilt to a Billy bookcase, but wanted to offset it so it could see more of the room. Here is the result!

There are two arm options - one is straight, the other angled. If your Billy is closed to the wall you'll need to use the angled option or the camera will hit the wall when it calibrates. The printable pin locks the arm to the bookcase. There is a cable hook to hold back the cable from the base. You'll need a ¼"-20 screw to lock the pan-tilt base to the arm. I used these: https://www.amazon.com/gp/product/B00OOLKD3U but there are many similar options that will work. 

Prints great with no supports. You may need to mirror the model in the slicer depending on your use case. 

Please note that this is sized to work on a single Billy bookcase. If you have two that are together this likely won't fit. 

If you use this I'd love to see your make!