This is a remix of a couple of models that were made for the rook mk1, by the great Kanrog. The first one makes it easer to install with a v2 lock nuts model , the second model made to be able to print on the rook in 3 pieces(self replicating!!! so cool!!!) and had spaces for wiring for a heated bed. the heated bed model is what i needed but it had no square locking nuts… and also i just wanted a single piece without assembly
so i frankenstein monstered them all…. it isnt perfect and im not very good with tinkercad, but the holes line up so i guess it gets the job done!!
printed it at 4 lines, 20% infill.
i have had warping issues the first attempt, so on one i used a brim of 6 lines without enclosure heavy gluestick, and a raft of 2m for the other one and they both worked. printed in ASA, one with and without enclosure and the one without encloser with heavy gluestick worked perfect too…. so adhesion is key!
ill print a couple in PLA asap and post those pictures as well
use the bed screws from this
OG models i remixed from
https://www.printables.com/model/381949-rook-mk1-clamped-bed/files
https://www.printables.com/model/482288-rook-mk1-3-piece-bed-gantry
thankss for looking!! the last 3 pictures are the print on top of the OG print, and the holes are dang near spot on, so im sure it will work just fine!
The author remixed this model.