Pinda probe holder for Voron

This model is a remix of other designs available on Printables. 

I changed the model so it is now in 2 parts that are bolted together. I had problems with other designs that would break when screwing down the holder. 

This design requires 2 M3 threaded inserts, 2 M3x16 bolts at the bottom and 2 M3x25 bolts on top to mount the holder to the carriage (all standard-ish dimensions for Voron hardware)

The model was printed in place without supports, in ABS/ASA and 0.2 mm layer height on a Prusa MINI using default settings.