Challenge Coin Display / Challenge Coin Holder two options

Two different options for displaying challenge coins.  The first is a tall vertical stand.  You will need supports when printing the middle flat, or you can stand it on end and print without supports.  The second is a small desktop display. Print top down and the bridging should eliminate any supports.  printing on the side may do the same.

For the 3 piece stand there's a 0.2mm tolerance built in for a press fit.  If that is too loose, you can apply a small amount of glue.

Like my work and want to say thanks? Buy me a Coffee https://www.buymeacoffee.com/pwmodder1027