Lens removal tool

This is a tool that uses the friction of a rubber in order to remove single lenses from an objective.
It can be adapted in openscad to diameters of different lenses.
I have printed it in TPU with a shore of A95 and its probably on the harder side.
Here is a image that shows how it is used: https://images-na.ssl-images-amazon.com/images/I/41tPAOPSYYL.\_AC\_.jpg

Print instructions

Unassociated tags: lens removal tool

Category: Other Summary

This is a tool that uses the friction of a rubber in order to remove single lenses from an objective.
It can be adapted in openscad to diameters of different lenses.
I have printed it in TPU with a shore of A95 and its probably on the harder side.
Here is a image that shows how it is used: https://images-na.ssl-images-amazon.com/images/I/41tPAOPSYYL.\_AC\_.jpg

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2S

No

Supports:

No

20

Infill:

15%

Notes:

nozzle temperature of 230° C; bed temperature of 65° C.
6 Perimeters; 6 Top layers; 6 Bottom layers; no retraction, max volumetric speed 15 mm^3/second; fan speed 50%