Parametric Magnetic Clasp Box

First draft of a parametric resizable 3D-printed box. To clarify, a box is a common storage vessel which can be used to contain objects smaller than itself.

Joking aside…

Additional Materials:
2x M3x25 machine screws
2x 8x3mm neodymium magnets

Print Settings:
0.4mm nozzle
0.2mm layer height
No supports
15% infill

To assemble, tap the M3x10 screws into the two hinges, and press-fit the magnets into their respective slots in both the box and lid (be sure to match up opposite poles, or you'll get a box that never closes!)