Bambu Labs AMS 2-tier Dual stand V3, V5 and V6 (for 3 or more AMS)

This AMS stand center support allows you to only use two pieces of 2020 extrusion in the center when you are stacking 3 or 4 AMS units.  This also makes the stand more rigid.  All of the holes for the 2020 are 20.2 mm square which worked well for me in PETG. Combined with the left and right sides from this or this to complete the stand.

Please see this model for the spacing sizes for the V3 model.

The pockets for V5 are approx. 39mm, 48mm, 46mm, 48mm and 34mm from front to back.

There are two versions - A V3/V3 version for when you have the V3 versions on both sides. And an upper version with a V5 AMS on the left and a V3 AMS on the right.

The V5/V3 version has a version with labels and one without..  the one with labels is very easy to print on the Bambu X1.

NEW November 2024: I added another AMS in October 2024 which had only 3 pockets under the left and right side. I am calling these V6.  Lower bracket has been modified to be more universal and accept V3, V5 and V6 versions of the AMS case and are no longer directional. If there is enough interest I will create the V3, V5, V6 upper brackets as well.

I used the suggested printer settings of  0.4mm nozzle, 0.2 layer, 4 walls, 4 top/bottom shell, 20% gyroid.

Added dual left/right brackets for 3 or more AMS units. New mid for V6 of the AMS.