I've designed an arm to be used with Aqara Roller Shade driver E1 for a Robot Vacuum Garage Doors project for my friend.
The project details are well described here: https://www.reddit.com/r/homeautomation/comments/145yvep/simplest_implementation_of_robot_vacuum_garage
Supports:
No
Resolution:
0.2
Infill:
30%
Filament:
Any PLA
Notes:
I've used 6 perimeters to maximize strength, which is probably an overkill
The author marked this model as their own original creation. Imported from Thingiverse.