Strong enough for the filament holder and when tightened properly rotates 90°.
What I don't like is that the STL contains two and the included support. The support provided a smooth bottom layer but I had to use a tool to remove the support.
3030 M3 Drop-In T-Nut with Snap-Off Printed Supports
3030 M3 Drop-In T-Nut with Snap-Off Printed Supports
10
31
1
195
updated June 10, 2023
Makes
Comments
@MaxStein Hi Max, ty for this feedback & 5 stars !!
1) PrusaSlicer will let you split a multiple model file into individual objects, super easy, right click on objects, from pop-up menu choose "split" then "To objects".
2) Yes I modeled the supports to be very close to the object, was looking for a very clean finish, and since they're small, human hands don't have the torque and leverage to remove, I needed to use tool as well. (edited)
@Mykal451_7969 Great tip. Wasn't aware that Prusaslicer can split STL into objects.
I didn't paid much attention during slicing and printed 8 pcs. (4x2 pcs.) instead of 4.