LM10UU and LM10LUU Extractor for SVO6 Plus and SV06 10mm Z rod mod

This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings. I recommend triangle infill.

Instructions from original post:

Print Settings

• Layer height 0.2mm
• Sturdier settings, e.g. 1.2mm walls and stronger top/bottoms, 20% infill

Usage (see this video)

• Remove the screws and washers on the bottom first
• Align the tool on the top so it touches the top bearing
• Hit it with a hammer until the bearings pop out on the bottom (there are two per side)