A printer footprint reducing spool holder intended to minimize wobble by positioning the filament spool over the Z-axis center of gravity. This will save table space and increase stability.
This design incorporates a bearing for smooth low-friction rotating action. The bearing is an interference fit, and can be pressed in with a soft jaw vise. The knurled nut is installed into the roller.
Parts BOM:
Standoff Guide:
A guide can be mounted for some spools which can bind, which will require the following hardware:
There are two guide styles, rev0 sticks off to the side, and in some cases the spool can act like a flywheel and get a little to ambitious during the feed process. Rev1 was added to solve this issue by feeding the filament towards the back. Rev1 will print on a Mini bed with skirt turned off, refer to the 3mf file.
Other Details:
Inspired by: https://www.printables.com/model/383327
Z-Axis support recommended: https://www.printables.com/model/360734
The author marked this model as their own original creation.