100W PD Power Bank USB-C (IP2368, 4S1P)

I decided to make my portable power bank with PD using IP2368. I used 4 batteries 18650 connected in series. The battery balancing board must be attached to the battery holders. 

No bushings are required! You will need a few screws:

• 4 x M2.2x5mm - for battery balance board
• 2 x M2.2x5-10mm - for IP2368 board
• 4 x M2.2x5-10mm - for back cover
• 4 x M2.2x5-10mm - for front cover

It is preferable to print it with PETG or another material with a higher melting temperature because the IP2368 board heats up at high power.

I have uploaded GCODE files for PLA and PETG.

IP2368 and Battery Balance Board: https://www.aliexpress.com/item/1005003954338954.html

If you like the project, you can buy me a beer: 

ETH > 0x9B2A6E93323b7c23f338C3a2006920F5b69dEbA6

USDT (ETH network) > 0x9B2A6E93323b7c23f338C3a2006920F5b69dEbA6