RGB matrix case
- Diffuser (print in place with color change)
- Case stand
- Back frame to fit esp32 dev boards, mini bread boards, etc
Printing Instructions
Please use white filament for diffuser. The case & stand can be printed from any color material.
I used matte white plastic for a better diffused finish
Setup
- If diffuser was printed separately, Use quick glue to attach it to front case.
- Insert LED matrix inside the frame, with alignment for resistors.
- Use glue to stick back base to frame.
Future Updates (someday…)
- Thicker frame stand for smooth surfaces.
- Add clippable back frame to avoid using glue.
- Add Opaque back frame for neater look.
Tags
The author marked this model as their own original creation.