Aztec Style Carving (Filament Painting)

6 Color HueForge model. Aztec carving filament painting made using Sunlu and Esun PLA+ colours.

Print at 0.08mm layer heights, 0.16mm first layer.  100% infill (Rectilinear)

Filaments Used:

Sunlu PLA+ Black Transmission Distance: 0.6

Sunlu PLA+ Grass Green Transmission Distance: 3

Sunlu PLA+ Coffee Transmission Distance: 3

Sunlu PLA+ Skin Transmission Distance: 5

Esun PLA+ Bone White Transmission Distance: 5

Sunlu PLA+ White Transmission Distance: 5

Swap Instructions:

Black until layer #5 at 0.48mms

Grass Green until layer #6 at 0.56mms

Coffee until layer #7 at 0.64mms

Skin until layer #9 at 0.8mms

Bone White until layer #11 at 0.96mms

White for the rest

This is a filament blending model, avoid special filaments and stick with the plain ones for the best results.  SUNLU filaments tend to be more transmissive and are a good choice.

Use the exact numbers in your slicer to match up properly.

two different size models are supplied and designed to print with 0.4 nozzle, do not resize the images in the slicer