Magnetic Lid

This model fits jars that have 61.5mm diameter and 64.5mm with thread.

Works great as a concept, but my initial 1x5mm magnets are too weak to make it snappy. Once I get my hands on 1x8 magnets, I will re-print the lid. Perhaps add different openings per suggestion. Maybe I will make a version with replaceable lids

The new model is a bit taller to make it fit the whole thread. Also, I moved the magnets closer together for more strength.

You will need:
6 - 1x8mm circle magnets

1 - Pause print to insert magnets in the inner part

1 - Glue magnets on the outer shell after completed print. (Decided to do this for better magnetic force) And they will not be seen since they will face inside the jar.