Feet Riser for Ikea Vilto Shelfs. Use them to generally increase the height of the shelf or to set the self up on uneven grounds.
The riser are provided as models in 1cm steps between 4 and 10 centimeters. The sub 1cm fine tuning can be done via the screws at the end of the Vilto Shelf. You can also modify the Fusion file and set the “riser_height” paramer to your desired height.
Print Settings:
Print with PLA or PETG. Infill of 20% should be enough due to inner perimeter. Make sure to use an infill that supports the upper side, e.g. grid or rectilinear.
Print from Pictures:
Prusament Galaxy Black PLA, 20% Infill, printed with Mini+ 0.2mm Speed profile.
The author marked this model as their own original creation.