large baseplate for Makita/Katsu routers

A large baseplate with handle for the trimmer-base of Makita and Katsu routers
10
71
0
434
updated June 3, 2023

Description

PDF

This model is not really a Remix but constructed entirely from the ground up. But it's heavily inspired so I wanted to pay my respects by marking as one.

 

Main differences to the original are a larger hole for router bits (as large as the trimmer base allows) as well as a locator for the handle to restrict any rotation. The base is also slightly larger and slightly different in shape.

For assembly, you'll just need a 40mm M6 screw and M6 nut.

 

printing advice

Because the base should flex as little as possible, I suggest printing with 4-5 outlines as well as 40%+ of Gyroid infill. For the handle, 3 outlines and 20% infill are enough.

The base needs support for the cutout of the M6 nut, the handle for the locator as well as the overhangs (unless your printer has a sick capability of doing them)

Model origin

The author remixed this model.

License