I started building myself a hex panel led lamp, and needed a clean way of hiding the ugly PSU and WLED board.
A case for a 5V 20A HoneyWell-style PSU off AliExpress and a spot for a NodeMCU ESP32 on a prototype board.
Attach lid to case with some kind of screws, the holes are set for ~4.5mm self-tapping screws (4.22mm clearance).
The screws for the uPesy medium prototype board should be ~3.5mm.
I printed mine on a P1P with a 0.6mm nozzle, total print time was around 12 hours.
The author marked this model as their own original creation.