This is a very special wheel. Keep your rings hanging from the wheel and they will go round and round without stopping. It is very decorative and practical.
Print the pieces in the quantities indicated in the files:
Foot (Pie.stl): 2 un.
Arm (Brazo.stl): 10 un.
Support Ring (SoporteAnillo.stl): 10 un.
The rest of the files only one unit is necessary.
Files used to print the model on an i3 Mega S have been added.
To assemble it, we must first glue the arms to one of the wheels, making sure that they are well aligned.
Later, we will glue the remaining wheel to this assembly.
Once we have the complete wheel, we will insert the feet into the axis of the wheel and glue the platform to the feet.
When we have all this assembled, we will hang the ring holders on the arms. And now we can hang the rings and the wheel begins to turn and turn.
I hope you liked this model and enjoy it.
……………………………………………………………………………………………………………………………………………………
Esta es una noria muy especial. Guarda tus anillos colgados de la noria y darán vueltas y vueltas sin parar. Es muy decorativa y practica.
Imprime las piezas en las cantidades indicadas en los archivos:
Pie: 2 un.
Brazo: 10 un.
SoporteAnillo: 10 un.
El resto de archivos solo una unidad es necesaria.
Se han añadido los archivos utilizados para imprimir el modelo en una i3 Mega S.
Para su montaje deberemos pegar primero los brazos a una de las ruedas asegurándonos que queden bien alineados.
Posteriormente, pegaremos la rueda restante a este conjunto.
Una vez tengamos la rueda completa, insertaremos los pies en el eje de la rueda y pegaremos la plataforma a los pies.
Cuando tengamos todo esto montado, colgaremos los soportes de los anillos en los brazos. Y ya podremos colgar los anillos y que la noria empiece a girar y girar.
Espero que os haya gustado este modelo y disfrutéis de él.
The author marked this model as their own original creation.