Square Hexagon Box

Designed in Fusion360 and printed in 3D Fuel Pro PLA on my MK3S.
23h 13m
2× print file
0.15 mm
0.40 mm
160.00 g
666
1452
37
8056
updated December 24, 2020

Description

PDF

Designed in Fusion360 and printed in 3D Fuel Pro PLA on my MK3S.

Stuff it will hold include, but not limited to:
Candy
Kosher salt
Hardware
The ashes of a beloved deceased pet
A smaller box
Jewelry
Change
Herbs

The model consists of 6 printed parts, I usually do the base, inner, lid and knob in one color then the trim and shroud in another color.

In addition to the printed parts, you will need:
5x M4x8mm Socket Head Cap Screws to attach the inner to the base and the lid to the knob.

Print instructions

I usually print these in 3D Fuel Pro PLA.
15% infill is fine.
.15mm layer height is a great "Goldilocks" resolution.
No support necessary, although the lid could use a little in the recessed bolt hole.
I design in Imperial (Majestic) Units. If you aren't using the latest PrusaSlicer, you will probably have to adjust scale to 2540% because 25.4mm is equal to 1".

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more