7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan

Nice fitting case. Easy to print and very stable.

polymaker petg

This is a great stand and case. I’m using it with an old Pi3 so I didn’t bother with the fan.

As well is needed:
 https://www.printables.com/de/model/152479-plate-mounting-bracket-for-7-touchscreen-case
And:
 https://www.printables.com/de/model/44218-7-touchscreen-case-for-raspberry-pi-4-internal-fan/files

Fits seamlessly with the other parts for this set! I loved the simplicity of the mounting of the RPi. Was the first time I found a use for thread inserts I bought ages ago.

I’ll add fan and cover later, but very nice print. Viewing angle adjusting would be nice with these feet as well, but I can manage.

Great project, prints well, but when I got it done, I realized that I had misread the caption and it was for the Pi 3b not the Pi 4b. Had not seen the one for the Pi 4 yet so ordered a commercial one that came with all the power cables, etc. I do have a Pi3B but not an extra 7" display so will keep the one I printed for it. Thanks, this saves me the time designing one for myself.

i´m about to print this but where can i find the legs for this?
Thanks for good work (edited)

I printed this and it came out beautifuly, BUT when I was trying to install the case top the m3x12 just protruded under a mm, it was almost flat with the surface, feels like you would need m3x14 or m3x16 to make it fit and grab the ruthex inserts